Sunday, 13 October 2019

Using a plasma dome for paranormal investigating

Paranormal Theory suggests that spirits need energy in order to manifest or communicate with the living. In many investigations, attempts to raise energy levels result in investigators, myself included, opening themselves up by giving permission for spirits to use their personal energy. Now this may be convenient at the time, but it is not ideal, as by opening yourself up and giving permission for spirits to take from you, you may find yourself with an outcome that you would rather not wish for.

To avoid any unwanted attachments, it is possible to raise energy levels using a scientific approach. The first is by using an EMF pump, but another way, is to use a plasma dome or ball.

So, could a child's novelty toy be used to investigate the paranormal? Well, the answer is yes ..... definitely.

The plasma dome is a clear glass sphere that is filled with a mixture of various noble gases, but mainly neon, and with a high-voltage electrode at the centre of the sphere. When the voltage is applied (power plugged in or from batteries), a plasma is formed within the sphere. The plasma filaments extend from the electrode to the outer glass sphere, which is an insulator, giving the appearance of beams of coloured light. When this occurs, a radio frequency is emitted which may interfere with other devices, resulting in readings, or in the paranormal world, false positives.

I would suggest doing a few simple experiments to understand the capacity and strength of your plasma ball before you start using it for investigations.



Working out the dome's radius of effect


  • Place your plasma dome in the middle of a table or room. Turn you plasma ball on. 
  • Place a K2 meter next to the plasma dome, you should be receiving orange to red hits on your K2, depending on the strength of the ball. 
  • Slowly slide the K2 away from the plasma dome until you have a solid green hit. Measure this distance (this is your radius of effect)
  • Trial your radius of effect by moving the K2 meter around the circumference of an imaginary circle (where the dome is the centre of the circle), to ensure you are accurate with your radius of effect. 
  • Randomly move your K2 meter in and out of the circle to validate the level of emission. In other words, move it closer to the dome until you get orange and red hits and then back away from the dome until the meter is green. Once you have validated the radius of effect, use this as a reference when investigating and do not place any other devices within that radius, as you need to ensure that the radio frequency emitted does not interfere with any of your other devices. 
Also, a good understanding of how conduction works is vital in getting the best out of your plasma dome. If you place your right hand on the plasma dome and then your left hand on the K2 meter, you should be able to conduct the electricity through your body, which will be shown by a reading on the K2 meter. This is important to note, just in case you touch the dome and then move close to or pick up your K2 meter.

How to use the dome in an investigation


There are a number of ways to use a plasma dome in an investigation. The one that I find most valuable is to use the dome in conjunction with an Electronic Voice Phenomena Recorder (EVP). By placing the EVP near the dome, entities may use the dome's energy and the emitted radio frequencies to manipulate the frequency to communicate with us. The EVP can register a wider pitch range, from 7 Hz to 50,000 Hz, whereas average human hearing will only register sounds from approximately 20 Hz to 20,000 Hz. This range obviously changes based on age, exposure and ear damage. What this means is, the EVP may pick up sounds and voices that the human ear can not. 

A second method is asking any spirit entities to come and touch the plasma dome. As when a human touches the dome's outer shell, the coloured beam would form an arc from the centre electrode to the point of contact. In theory, this should work if a spirit entity touches the dome or pulls energy from it. 



If an arc is visible and you have your dome situated within the validated radius of effect, then you can begin to eliminate or debunk possible causes of the arc. In this circumstance, the arc may be related to paranormal phenomenon and as an investigator you would begin to request that any entities touch the dome on the left, and then on the right or on one side for a yes, and another for a no. If the dome responds positively, then you may have a possible spirit communicating with you. 

Whenever you are investigating with a new piece of equipment, ensure you practice with the device before you take it out with you. Learn how it works, how it responds and how it interacts with you and any other devices or equipment you may use. 

Use the dome in conjunction with an EVP, K2s (or any EMF meter), an ovilus and a video camera for best results. 

From my experience the dome works best when young spirits are present or in one where voices or growls are often heard. 

Good luck with this fun, cheap addition to your investigation kit. 


No comments:

Post a Comment